GPS Tracker Parameter Editor V1.39.torrent ((INSTALL))
LINK ->>> https://urloso.com/2tvy9v
How to Use GPS Tracker Parameter Editor V1.39 to Configure Your GPS Trackers
If you have a GPS tracker device such as GT30, GT30X, GT60, VT300, VT310, or MVT400, you may want to use a software tool called GPS Tracker Parameter Editor V1.39 to configure its settings. This tool allows you to set up parameters such as GPRS, SMS, password, logging, power saving, and more. In this article, we will show you how to download, install, and use this tool.
Download GPS Tracker Parameter Editor V1.39
The first step is to download the software tool from a reliable source. You can use a torrent client such as BitTorrent or uTorrent to download the file GPS Tracker Parameter Editor V1.39.torrent from one of these links:
https://www.scribd.com/document/223334857/GPS-Tracker-Parameter-Editor-V1-39-1
https://www.scribd.com/document/74583097/GPS-Tracker-Parameter-Editor-V1-39-for-VT310
https://pastebin.com/KEXHSQak
Make sure you scan the file for viruses before opening it.
Install GPS Tracker Parameter Editor V1.39
The next step is to install the software tool on your computer. You will need a Windows operating system (Windows 2000, XP, or Vista) and a USB cable and a USB-to-Serial Adaptor supplied by your GPS tracker manufacturer. You will also need to install the driver for the USB-to-Serial Adaptor. Here are the steps to follow:
Run PL-2303 Driver Installer (or CP210x Driver Installer for VT310) to install the driver for the USB-to-Serial Adaptor. You can find this file in the folder USB-232 Driver in the CD that came with your GPS tracker or download it from http://www.prolific.com.tw/US/ShowProduct.aspxp_id=225&pcid=41.
Connect the USB cable and USB-to-Serial Adaptor with your computer and then open Device Manager. You can then find Prolific USB-to-Serial Comm Port (or Silicon Labs CP210x USB to UART Bridge) as the following picture shows. Note: Remember this Com number. It needs to be input in GPS Tracker Parameter Editor.
Run GPS Tracker Parameter Editor V1.39.exe (or versions above) and the following configuration window will be opened:
Use GPS Tracker Parameter Editor V1.39
The final step is to use the software tool to configure your GPS tracker settings. You will need to connect your GPS tracker device (GT30, GT30X, GT60, VT300, VT310, or MVT400) to your computer by the USB cable and USB-to-Serial Adaptor. Here are the steps to follow:
Select the same COM as the Device Manager shows and click Start.
Press and hold the SOS button aa16f39245